Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: [email protected] Website: www.integrated-circuit.com
ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011
34
2.7.2 TTL 4-Wire Remote Control – Signal Connections
The Remote System connects to the programmer via the
‘Remote Control Port’
which is the 14-way
IDC connector. The signal names and descriptions are detailed in fig. 2.8.2.
Fig. 2.8.2 Remote System Control Port – signal names and descriptions
Pin
No
Programmer
Pin name
Input /
Output
Notes
7
REMOTE START
SIGNAL
I
•
This is the TTL-4-wire Remote Control Port
‘START’
signal.
•
Connect to
‘START’
output of the Remote
System
9
REMOTE FAIL SIGNAL O
•
This is the TTL-4-wire Remote Control Port
‘FAIL’
signal.
•
Connect to
‘FAIL’
input on Remote System
11
REMOTE OK SIGNAL
O
•
This is the TTL-4-wire Remote Control Port
‘OK’
signal
•
Connect to ‘OK / PASS’ input on Remote
System
13
REMOTE BUSY
SIGNAL
I
•
This is the TTL-4-wire Remote Control Port
‘OK’
signal
•
Connect to
‘BUSY’
input on Remote System
10,
12, 14
GROUND (0V)
P
•
Connect to GROUND on Remote System
O - Output from programmer
I - Input to programmer
P - Passive e.g. GROUND and power rails
N/C - Not connected
51 / 135
51 / 135
