Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: [email protected] Website: www.integrated-circuit.com
ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011
6
•
Remote Keypad / Display (ideal for standalone control in a Test Fixture)
Gang Programming support
•
Up to 32 programmers can be controlled from a single PC using the RS485 Bus
Standalone Operation
•
Programmer can operate in
‘Standalone Mode’
i.e. without PC Control.
•
Programmer can be controlled via [START] button, 4-wire TTL Remote control Port, Target
Detection or Lid switch detection control methods or Remote Keypad / Display.
Supports up to 64 Independent 'Programming Projects'
•
Each project supports programming of a complete device inc.
FLASH, EEPROM, Fuses etc.
High accuracy Programmer Controlled Target Vcc Power Supply
•
The programmer can switch 1.8 to 5.0V @ 300mA to the Target System.
•
Ac/- 20 mV
Programmer controlled Target Discharge Circuit
•
The programmer can automatically discharge any residual charge on the Target System to
guarantee that the Target Vcc reaches 0V.
High accuracy Programmer Controlled Target Vpp Power Supply
•
The programmer can switch 6.5V to 13.5V @ 100mA to the Vpp pin of a Target IC.
User-swappable I/O Connector Modules (optional)
•
Many different I/O Connector Modules are available to suit any required connection system.
Firmware upgradeable
•
New algorithms and features can be added via a simple firmware upgrade
Compact physical size ideal for integration into Test Fixtures
•
Programmer measures only 9cm x 6cm x 6cm and has ergonomic design to supports the
maximum packing density.
Special ATE programmer version with RELAY isolation available (option)
•
All programmer ISP and power signals are galvanically isolated via relays.
Special multiplexed programmer version available
•
A single ISPnano programmer is multiplexed sequentially to either 2, 4 or 8 Target Boards
(UUTs) in turn.
23 / 135
23 / 135
