Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of ISPNANO S3 KIT - ISP PORTABLE PROGRAMMER
Contact us: [email protected] Website: www.integrated-circuit.com
ISPnano Series Programmer - User Manual – V1.11 – 12
th
May 2011
24
2.2 Hardware Installation Procedure
Please follow the instructions below to set up the programmer hardware:
2.2.1 ESD Precautions
•
Ensure you are wearing an ESD strap and/or you are working in an ESD
protected environment.
•
The programmer I/O lines are ESD protected, but it always good practice
to take proper ESD precautions. This can help to avoid ESD damage to
either the programmer or Target System.
2.2.2 Unpacking the programmer and accessories
The ISPnano
‘programmer kit’
comes complete with the IPSnano programmer, CONMOD Module,
RS232 serial cable, USB cable and various ISP cables. Please see the
‘System Contents’
section.
2.2.3 Selecting the Communications Mode
The ISPnano programmer range can be controlled via RS232, RS485 or USB.
Please see section 3 for a full explanation of each communications mode.
2.2.4 Powering the ISPnano programmer
The ISPnano programmer requires a power supply of 9.0 – 24.0V to be connected to the
‘DC IN’
2-
pin JST connector on the rear panel of the programmer – see illustration below.
41 / 135
41 / 135
