Epson Stylus Pro 7450, Руководство пользователя

Страница: 167 / 373

The Control Panel 167
CUTTER ADJUSTMENT
You can adjust the paper cutting position when printing with a
top and bottom margin of zero. This function prints cutter
adjustment patterns and you can select the appropriate cutting
position from them.
REFRESH MARGIN
When you select
ON
, the printer cuts an extra print area after
borderless printing is used automatically.
AUTO NOZZLE CHECK
When you select
ON
, the printer performs a nozzle check before
printing, for each print job.
Note:
❏
Do not select
ON
if you are using non-Epson special media, or if the
width of paper you are using is less than 210 mm.
❏
This setting is available only when you select
ON
for AUTO
CLEANING.
AUTO CLEANING
When you select
ON
and perform a nozzle check from the printer
driver or the control panel, the printer not only checks for clogged
nozzles, but also performs head cleaning automatically.
Note:
Do not select
ON
if you are using non-Epson special media, or if the width
of paper you are using is less than 210 mm.
QUIET CUT
When you select
ON
, the printer cuts the printout slowly to
decrease the cutting noise and paper particles.