Epson Stylus Pro 7450 Скачать руководство пользователя страница 13

Страница: 13 / 373

Safety Instructions

When handling the ink cartridges

❏

Keep ink cartridges out of the reach of children and do not
drink.

❏

If ink gets on your skin, wash it off with soap and water. If it
gets in your eyes, flush them immediately with water.

❏

Shake the ink cartridge well before installing it for best results.

Caution:

Do not shake cartridges (that have been installed previously)
with too much force.

❏

Do not use an ink cartridge beyond the date printed on the
cartridge carton.

❏

Use up the ink cartridge within six months of installation for
best results.

❏

Do not dismantle the ink cartridges or try to refill them. This
could damage the print head.

❏

Store ink cartridges in a cool, dark place.

Содержание Stylus Pro 7450






















































































































































































































































































































































































Результаты поиска

Содержание Stylus Pro 7450

Отзывы:

Похожие инструкции для Stylus Pro 7450

Бренды по названию

Популярные бренды

Epson Stylus Pro 7450, Руководство пользователя

Результаты поиска

Содержание Stylus Pro 7450

Отзывы:

Похожие инструкции для Stylus Pro 7450

Бренды по названию

Популярные бренды