Epson Stylus Pro 7450, Руководство пользователя

Страница: 98 / 373

Variety of Printings 98
Note:
When you want to cut prints manually, select OFF .
Explanation Normal Cut is
default setting. The top area may
smear because the
top area of the roll
paper is cut while
the print operation is
stopped.
If the cut position is
slightly shifted, the
image on the
continuous page
remains on the top
or bottom area;
however, the
printing time gets
shorter.
If you select Single
Cut and print only a
piece of paper, the
operation will be the
same as Double
Cut. If you print
more than one
paper continuously,
cut 1 mm along the
inside of each
picture to avoid
creating a margin
between pictures.
The top area may
smear because the
top area of the roll
paper is cut while
the print operation
is stopped.
Because inside of
each picture is cut
in order to not
leave a white area
in the top and
bottom position,
the size of the
paper gets 2 mm
shorter.
After cutting the
bottom area of the
previous page, the
printer feeds the
paper and then
cuts the top area of
the next page.
Because of that, 80
to 130 mm of scrap
of paper is
produced. Take
care to cut the
paper precisely.