Epson Stylus Pro 7450, Руководство пользователя

Страница: 12 / 373

Safety Instructions 12
❏
Do not attempt to service this product yourself.
❏
Unplug this product and refer servicing to qualified service
personnel under the following conditions:
The power cord or plug is damaged; liquid has entered the
product; the product has been dropped or the cabinet
damaged; the product does not operate normally or exhibits
a distinct change in performance.
❏
If you plan to use the printer in Germany, observe the
following:
To provide adequate short-circuit protection and
over-current protection for this printer, the building
installation must be protected by a 10 or 16 amp circuit
breaker.
❏
If damage occurs to the plug, replace the cord set or consult a
qualified electrician. If there are fuses in the plug, make sure
you replace them with fuses of the correct size and rating.
When using this product
❏
Do not put your hand inside this product or touch the ink
cartridges during printing.
❏
Do not move the print heads by hand; otherwise you may
damage this product.
❏
Always turn the product off using the Power button on the
control panel. When this button is pressed, the
Power
light
flashes briefly then goes off. Do not unplug the power cord or
turn off the product until the
Power light stops flashing.