Epson Stylus Pro 7450 Скачать руководство пользователя страница 10

Страница: 10 / 373

Safety Instructions

Safety Instructions

Important Safety Instructions

Read all of these instructions before using this product. Also be
sure to follow all warnings and instructions marked on the
printer.

Warning, Cautions, and Notes

Warnings

must be followed carefully to avoid bodily injury.

Cautions

must be observed to avoid damage to your equipment.

Notes

contain important information and useful tips on the operation of this
printer.

When choosing a place for this product

❏

Place this product on a flat, stable surface that is larger than
this product. This product will not operate properly if it is
tilted or at an angle.

❏

Avoid places subject to rapid changes in temperature and
humidity. Also keep it away from direct sunlight, strong light,
or heat sources.

❏

Avoid places subject to shocks and vibrations.

❏

Keep this product away from dusty areas.

Содержание Stylus Pro 7450






















































































































































































































































































































































































Результаты поиска

Содержание Stylus Pro 7450

Отзывы:

Похожие инструкции для Stylus Pro 7450

Бренды по названию

Популярные бренды

Epson Stylus Pro 7450, Руководство пользователя

Результаты поиска

Содержание Stylus Pro 7450

Отзывы:

Похожие инструкции для Stylus Pro 7450

Бренды по названию

Популярные бренды