Epson Stylus Photo 825, Основы работы с принтером

Страница: 99 / 120

Solving Problems
93
You see wrong or missing colors.
■
Make sure
Black Ink Only
is off
(Windows) or
Color
ink is
selected (Macintosh), even
when printing black and white
photographs.
■
Clean the print head; see
page 61 for instructions.
■
The ink cartridges may be old or
low on ink; see page 63.
■
Try turning off PhotoEnhance.
Also check if you’re using a
special effect that alters image
colors, like Sepia.
■
Try using Automatic mode
(Macintosh only); see page 41
(OS 8.6 to 9.x) or page 43
(OS X).
■
Try changing the
Gamma
setting; see page 45 (Windows)
or page 48 (Macintosh).
■
Your printed colors can never
exactly match your on-screen
colors. However, you can use a
color management system—
such as ICM (Windows; see
page 45) or ColorSync
(Macintosh; see page 48)—to
get as close as possible.
Paper Problems
Paper doesn’t feed correctly or
jams in the printer.
■
If paper doesn’t feed, remove it
from the sheet feeder. Fan the
edges of the sheets, reload them
against the right edge, then slide
the left edge guide snugly, but
not too tightly, against the
paper.
■
If paper jams, press the
b maintenance button to clear
the jam. If necessary, open the
cover and remove any jammed
or torn pieces. Load new paper
and press the
b maintenance
button.
■
If multiple pages feed at once,
remove the paper from the sheet
feeder, fan the edges to separate
the sheets, and carefully reload
it.
■
Use new, smooth, high-quality
paper, loaded printable side up.
■
Don’t load paper above the
arrow mark on the left edge
guide.
■
Make sure the edges of the
paper are not curled. If they are,
lay the paper flat (inside the
package), face down, and place a
heavy, flat book on top of it
(overnight, if possible).
VSEDVLFVERRN3DJH:HGQHVGD\-XO\30