Epson Stylus Photo 700, Руководство пользователя

Страница: 178 / 221

To replace an ink cartridge while the
B
and
A
ink out lights are
off, follow these steps.
c
Caution:
q
Once you remove an ink cartridge it becomes unusable
and cannot be reinstalled, even if ink remains in it.
q
Leave the old cartridge installed in the printer until you
are ready to replace it with a new one.
1. Make sure the printer is on. The
P
power light should be on,
but not flashing.
2. Lower the output tray at the front of the printer; then open
the printer cover.
3. Hold down the
E
load/eject button for three seconds. The
print head moves to the replacement position. The
P
power light begins flashing.
c
Caution:
Do not move the print head by hand. Always use the
E
load/eject button to move it. Otherwise you may damage
the printer.
Note:
The printer automatically moves the print head back to its home
(far right) position after 60 seconds if you have not started the
replacement procedure.
C-31
8
Tr
ou
b
les
h
o
ot
in
g
R
Rev.C
A5 size Chapter 8
12-05-97 DR, pass 0
Troubleshooting 8-35