75
You see wrong or missing colors.
■
Make sure the Ink setting is set to
Color
for color images and your
application is set for color printing.
■
Make sure the print head nozzles are
not clogged. To clean the print head,
see page 57.
■
Make sure an ink cartridge isn’t low
on ink. To replace an ink cartridge,
see page 61.
■
If you’re printing a high-resolution
image, turn off PhotoEnhance as
described on page 24.
■
Try using Automatic mode. See
page 17 (Windows) or page 22
(Macintosh) for instructions.
■
You may be using a PhotoEnhance
special effect that alters image colors,
such as Sepia; see page 24.
■
Your printed colors can never
exactly match your on-screen colors.
However, you can use a color
management system to get as close as
possible. See the advanced color
management tips on page 26 and
your electronic
Reference Guide
.
You see colored hues in the gray parts
of a black-and-white photograph.
You may be printing the gray tones in
color mode. Color mode provides the
smoothest gradations, but may make
some hues noticeable. To eliminate
color hues from the gray tones, make
sure the
Media Type
setting matches
the paper you loaded (see page 32) and
try one of the following:
■
Select
Black
as the Ink setting (your
image may be grainier, with less
subtle gradations); see page 17
(Windows) or page 22 (Macintosh).
■
Leave
Color
as the Ink setting, but
clean and align your print head, as
described on page 57 and page 64.
■
If you scanned the image, make sure
you calibrated the color correctly
with your scanning software.
■
Create a color calibration profile with
a color management program to
improve the image’s color balance.
Your printout is grainy.
■
Try using a higher quality paper.
■
Set the Quality/Speed slider to the
Quality
setting in your printer
software; see page 17 (Windows) or
page 22 (Macintosh).
■
Run the Print Head Alignment
utility. See page 64 for instructions.
■
You may need to increase the image
resolution or print it in a smaller size;
see your software documentation.
