Epson Pro GT-S80, Руководство пользователя

Страница: 12 / 119

keep both of the AC power cords straight at the ends and the points where they enter
the AC adapter.
Use only the AC adapter that comes with your scanner. Using any other adapter
could cause fire, electrical shock, or injury.
The AC adapter is designed for use with the scanner with which it was included. Do
not attempt to use it with other electronic devices unless specified.
Use only the type of power source indicated on the product’s label.
When connecting this product to a computer or other device with a cable, ensure the
correct orientation of the connectors. Each connector has only one correct
orientation. Inserting a connector in the wrong orientation may damage both devices
connected by the cable.
Avoid using outlets on the same circuit as photocopiers or air control systems that
regularly switch on and off.
If you use an extension cord with the scanner, make sure the total ampere rating of
the devices plugged into the extension cord does not exceed the cord’s ampere
rating. Also, make sure the total ampere rating of all devices plugged into the wall
outlet does not exceed the wall outlet’s ampere rating.
Never disassemble, modify, or attempt to repair the AC adapter, scanner, or scanner
option by yourself except as specifically explained in the scanner’s guides.
Do not insert objects into any opening as they may touch dangerous voltage points
or short out parts. Beware of electrical shock hazards.
If damage occurs to the plug, replace the cord set or consult a qualified electrician. If
there are fuses in the plug, make sure you replace them with fuses of the correct size
and rating.
Unplug the scanner and the AC adapter, and refer servicing to qualified service
personnel under the following conditions: The AC adapter or plug is damaged; liquid
has entered the scanner or the AC adapter; the scanner or the AC adapter has been
dropped or the case has been damaged; the scanner or the AC adapter does not
operate normally or exhibits a distinct change in performance. (Do not adjust
controls that are not covered by the operating instructions.)
Unplug the scanner and the AC adapter before cleaning. Clean with a damp cloth
only. Do not use liquid or aerosol cleaners.
If you are not going to use the scanner for a long period, be sure to unplug the AC
adapter from the electrical outlet.
WARNING:
The cords included with this product contain chemicals, including lead, known to
the State of California to cause birth defects or other reproductive harm.
Wash
hands after handling. (This notice is provided in accordance with Proposition
65 in Cal. Health & Safety Code § 25249.5 and following.)
Restrictions on Copying
Observe the following restrictions to ensure responsible and legal use of your scanner.