Epson LQ-300+II, Руководство пользователя

Страница: 92 / 162

92
0 slash
The zero character has a slash ( ) when this feature is turned on.
It has no slash (0) when this feature is turned off. The slash allows
you to easily distinguish between the uppercase letter
O and a
zero.
High speed draft
When you choose On , the printer prints up to 300 cps (characters
per second) at 10 cpi (characters per inch). When you choose Off ,
the printer prints up to 225 cps at 10 cpi.
I/F (interface) mode
The printer comes with three kinds of interfaces; a parallel
interface, a serial interface and a USB interface.
If your printer is connected to only one computer, choose Parallel ,
Serial
, or
USB
for the interface mode, depending on the interface
you use. If your printer is connected to two computers, select
Auto (automatic) to allow the printer to automatically switch
between interfaces depending on which one is receiving data.
Auto I/F (interface) wait time
This setting takes effect only when
I/F (interface) mode
is set to
Auto . This setting determines how long the printer waits when it
no longer receives data from an interface before it checks whether
a print job is being sent through the other interface. You can
specify
10 seconds
or
30 seconds
for the auto interface wait
time.
Baud rate
Use this option to set the data transfer rate (baud) for the serial
interface. The baud rate is measured in bits per second (bps). See
your computer manual and software documentation for the
proper setting.