This message...
means...
Do this...
NOT E-MAIL ADDRESS
When the destination for the
scan data was specified, a fax
number registered in the favorite
list or as a speed dial destination
or group dial destination has
been selected.
Directly type in the destination for
the scan data, or specify an e-mail
address registered in the favorite list
or as a speed dial destination or
group dial destination.
NOT INSTALLED P/U
CHECK x
The indicated photoconductor
unit is not installed.
Install the indicated photoconductor
unit.
NOT INSTALLED TONER
CHECK x
The indicated toner cartridge is
not installed.
Install the indicated toner cartridge.
NOT REGISTERED
No speed dial destination or
group dial destination is
registered.
Directly type in the destination
address for the scan data, or register a
speed dial destination or group dial
destination and try specifying the
destination address again.
OUTPUT TRAY FULL
REMOVE PAPER
The output tray is full of paper.
Remove all paper from the output
tray.
OVER SEARCH TIME
Communication with the LDAP
server has timed out.
Establish a connection with the LDAP
server again.
P/U END
REPLACE x
The time to replace the indicated
photoconductor unit has been
reached.
Replace the indicated
photoconductor unit.
P/U End x
The time to replace the indicated
photoconductor unit has been
reached.
Replace the indicated
photoconductor unit.
P/U Life (x)
The time to replace the indicated
photoconductor unit has been
reached.
Replace the indicated
photoconductor unit.
P/U Low x
The indicated photoconductor
unit is low and should be
replaced within 200 pages at 5%
coverage of Letter/A4 paper.
Prepare the indicated
photoconductor unit.
PAGE NO. NOT MATCH
(PRESS ANY KEY)
The front and back sides of the
document pages for
2-SIDE
&
2-SIDE
or
2-SIDE
&
1-SIDE
do
not match.
Press any key to cancel the job.
PAPER EMPTY
LOAD PAPER (xxx)
The indicated paper tray has run
out of paper.
Load media into the indicated tray.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Troubleshooting
233