Setting Duplex (Double-Sided) Copying
Duplex (Double-Sided) Copying From the ADF
With duplex (double-sided) copying, two single-sided document pages can be scanned with the ADF
and printed onto a single sheet of paper.
1. In the main screen (Copy mode), press the
u
or
d
key to select the current simplex/duplex
(single-sided/double-sided) setting, and then press the
Select
key.
2. Press the
u
or
d
key to select
1-SIDE
&
2-SIDE
, and then press the
Select
key.
3. Press the
u
or
d
key to select
LONG EDGE
or
SHORT EDGE
, and then press the
Select
key.
The main screen (Copy mode) appears again.
Note:
When
LONG EDGE
or
SHORT EDGE
is selected, duplex (double-sided) copying is performed as
described below.
1
1
1
1
2
3
If
LONG EDGE
is selected, the pages will be laid out to flip at the sides.
1
3
1
2
1
If
SHORT EDGE
is selected, the pages will be laid out to flip at the top.
Duplex (Double-Sided) Copying From the Original Glass
Duplex (double-sided) copying can also be performed by placing the document on the original glass.
Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s Guide
Using the Copier
134