Envirovent Slimline 150, Руководство по установке

Страница: 12 / 44

SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
11
The Slimline 150 can be mounted directly
to the wall or ceiling using the mounting
brackets supplied for that purpose.
Because of the appliance’s weight,
mounting the appliance must
always be done by two people.
For a vibration-free result the appliance must
be mounted to a solid wall with a minimum
mass of 200 kg/m
2
. A gypsum block or
metal stud wall will not suffice. Additional
measures such as double panelling or extra
studs are required in that case. In addition,
the following aspects must be taken into
account.
• The appliance must be placed level; both
lengthwise and laterally.
• The installation room must be such that a
good condensate discharge with air trap
and pitch for condensate can be made.
Make sure that under no condition
the condensate discharge is
installed at a pitch towards the
appliance.
The appliance is only suitable for
ceiling or wall mounting! Never
mount the appliance flat on the
floor because of the position of the
condensate discharge bin.
• The installation room must be frost-free.
• When mounting flexible ducts, bear in
mind that it must be possible to replace
them in due course.
• Make sure there is sufficient free space
at the appliance to allow cleaning of the
filters and maintaining the appliance. It
must be possible to swing the door open.
Ceiling mounting:
At least 70 cm at the underside of the
appliance and a free headroom of 1.8 m; if 70
cm free space is not available, for instance
when mounting on top of a suspended
ceiling, there must be sufficient room to
partly open and remove the front panel.
The front panel can be detached after
removing a lock screw at the hinge.
Make sure the filters can always be freely
removed, so there is no frame or other
obstacle at the level of the filters!
Wall mounting:
Make sure there is a free space of at least 70
cm at the front of the appliance and a free
headroom of 1.8 m.
Make sure there is at least 20 cm free space
at the appliance side where the electric
connections are located, so connectors and
sleeves remain accessible.
04 Installation Instructions