E-Streamer Engine
56
E-S
TREAMER
S
ETUP
Connecting up the E-Streamer
Basic connections
The minimum connections required for operation of the E-Streamer are:
Mains power
Connects via the IEC input socket.
The E-Streamer requires an AC voltage in the range 100V – 260V, at a frequency between 50Hz and
60Hz.
TCP/IP over Ethernet
Connects via Primary RJ45 socket (VR0) at 10/100MBps.
Allows connection to E-Streamer’s Web Interface
(see Web Interface on page 9)
for system
configuration and control.
Provides DMX over Ethernet input and output using Artistic Licence's Art-Net and Enttec’s ESP
protocol
.
Advanced Connections
USB
The 4 x USB 2.0 type A sockets provide connections for
•
Up to 4 x Enttec
DMX USB Pro
DMX to USB interfaces enabling direct DMX512 input and
output
)
DMX USB Pro connections on page 38
.
•
Standard USB PC keyboard for direct control of the Streamer Engine
(see Streamer Engine on page
54).
•
USB mass storage device for backup and restoration of Show and Playlist data
(see Settings Menu
on page 51)
or system firmware updates
(see Firmware Updates using USB on page 39)
.
RS-232 serial communications
The DB9 RS-232 socket provides connection for remote control of the E-Streamer using either
Enttec's serial control protocol or via an Enttec DMXPlayBack Remote unit.
(See Remote Control on
page 43)
.
Connecting a DMXPlayBack Remote unit requires an adaptor unit which is available separately from
Enttec.
PS/2
Standard PS/2 PC keyboard for direct control of the Streamer Engine
(see Streamer Engine on page 54)
VGA video
Standard DB15 VGA video socket, for viewing E-Streamer status and configuration screens
(see
Connecting to the E-Streamer’s Web Interface
The E-Streamer has 2 network ports. By default the Primary port is set to a static IP 10.1.2.3 with a
netmask of 255.0.0.0 and the Secondary port is set to acquire its IP from a DHCP server.
To connect to an E-Streamer via the Primary port (Enttec's preferred method), you will need to set the
IP address of your computer to an address on the same subnet (10.x.x.x) as the E-Streamer. The
suggested address is 10.0.0.1, but any unused address on the same subnet is valid.
(See
