Introduction
2
Package Contents
Your E-Streamer package should contain these items:
•
E-Streamer (Part No 70520.)
•
Cat 5 data cable 1.8m (Part No. 79102)
•
2 x mounting brackets
•
IEC power cable - Australia and NZ only
•
This user manual
If any item is missing or damaged, please contact your supplier immediately.
To be sure that you are using the latest revision of the E-Streamer firmware,
please visit the
Downloads
section of the Enttec website at
to
get the current version.
Safety Instructions
Do not expose this device to rain and moisture, or expose it to the risk of dripping or splashing.
Do not use this device near water.
Do not block any ventilation apertures on this device.
Do not install this device near heat sources such as heaters, stoves, monitors, amplifiers, dimmers,
luminaires or any other equipment that produces heat.
Do not expose the power adapter or power cables of this device to damage from being, crushed,
walked on or being pinched by protective cabinets, enclosures or cases.
Use only attachments, accessories or fixings specified by ENTTEC.
Unplug this device from the mains supply and external data links during electrical storms or when the
device will not be used for a long time.
Servicing this device should be undertaken only by suitably qualified service technicians.
Contacting ENTTEC
Email:
Telephone:
+61 3 9763 5755 GMT+10
Facsimile:
+61 3 9763 5688
Postal Address:
ENTTEC Pty Ltd
Unit 17/5 Samantha Court
Knoxfield
Vic 3180
Australia
Getting Support
If you require support for the E-Streamer, please visit the Support area of our website at
. There you can fill out a support request ticket for prompt assistance with your
enquiry.
