PROGRAMMING WELD PROGRAMS
Programming a Spot Weld with NetFlash
113 |
P a g e
Copyright © 2021 BF ENTRON and/or its affiliates. All rights reserved
Product Model:
iPAK2v2
Firmware Version:
V2.10
May 22 | Doc No 700253-2
9)
Set the
Squeeze
value to the desired values in terms of milliseconds, then press
ENTER
10)
Set the
Pre-Heat
time in terms of milliseconds, then press
ENTER
11)
Set the
Pre-heat Mode
to P/W.
12)
Since we are controlling the heat in P/W mode, the magnitude of the weld pulse is set in terms of
%
Heat
. Set this value to your desired
% Heat
.
13)
Set the duration of the
Cool1
pulse in terms of Milliseconds.
14)
Set the
Upslope
parameter in terms of milliseconds. This defines the time it will take for the control to
ramp up to the Main Heat/Current.
15)
Set the
Main Heat Mode
to
CCC
mode which allows us to program the output current in terms of KA.
16)
Set the
Current
to the desired weld current for the main current
17)
Set the
Main heat
parameter in milliseconds to define the duration of the pulse.
