Entrematic Canada Inc.
Toll Free: 1-877-348-6837
[email protected]
www.ditecentrematic.ca
Entrematic USA Inc.
Toll Free: 1-866-901-4284
[email protected]
www.ditecentrematic.us
Pg. 8
HA8-LP Manual V. 4.0
1.0 BEFORE INSTALLATION
Compliance Codes and Standards
The operator complies with the following codes and standards:
• UL STD.325 & ANSI/BHMA STD. A156.19; Fire rated UL STD. 10 (b); UL STD. 10(c); NFPA STD. 252
• CAN/CSA STD. C22.2 NO. 247 & CAN/ULC STD. S104
•
Under No Circumstances shall the Certification Label of the HA8 operator be tampered, modified
or removed!
•
It is the responsibility of the final installer and/or installation company, to certify that the final
completed operator is installed in accordance with local building codes and applicable laws.
1.3
Technical Specifications & Required Tools
Model
Ditec Entrematic HA8 LP
Dimensions
4.125” W x 5.125”H
Weight
Approx. 45 lbs
Power Supply
115 ± 5VAC, 60Hz, 3A
Consumption
DC16V/ 3 AMP
Motor
1/8 hp, 16VDC, 3A (Standard)
Rated Operation
Continuous opening and closing cycles
Manual Opening/Closing Force
-
during power failure
Opening Force: 15 lbs; Closing Force: 25lbs
Door Opening/Closing Speed & Force
Adjustable, see section
10.0 ADA ADJUSTMENTS
Operation -
during power failure
Low resistance when opened by hand. Door closes by spring.
Hold Open
Pulsed Energy to Motor. No overheating. Continuous hold open
Operating Environment
Ambient temperature -4F to +120F (-20C to +50C)
No condensation or icing
Ambient humidity 30% to 85% RH
(No hazardous materials must be present in the atmosphere)
Required Tools for installation:
•
Allen Wrench Set
•
Screwdrivers: Flat, Philip,
5/16” Hex. Nut
•
Power Drill and Drill Bits
•
Additional Fasteners Depending Surface
•
Level
•
Shims
•
Tape Measure
•
Hand Saw/ Power Saw
•
Wire Stripper