Enterasys SmartSwitch 6000, Руководство пользователя

Страница: 58 / 231

Managing the Module 2-39
The Device View
Configuring Fast Ethernet Ports on First Generation Modules
The Fast Ethernet Configuration window available for Fast Ethernet ports on first
generation modules (e.g., 6H122-xx and 6H128-08) allows you to both view and set those
ports’ available modes. All 100Base-TX Fast Ethernet ports can be configured to operate
in either standard Ethernet (10 Mbps) or Fast Ethernet (100 Mbps) mode, and in each
mode can be configured to operate in Full Duplex, effectively doubling the available wire
speed (from 10 to 20 Mbps in standard Ethernet mode, or from 100 to 200 Mbps in Fast
Ethernet mode); 100Base-FX (fiber) ports can be configured to operate in their standard
100 Mbps mode, or in Full Duplex mode. This window also displays the mode currently in
effect on the selected interface, and provides some information (where it is available)
about the interface’s link partner.
To access the Fast Ethernet Configuration Window:
1. From the Device View, click to select the port you wish to configure; the Port
Menu will display.
2. Click on Configuration. The Fast Ethernet Configuration window,
Figure 2-15 , will appear.
To access the Fast Ethernet Configuration window on SmartSwitch 6000 or Matrix E7
MicroLAN modules (e.g., 6H123-50):
1. In the Device View, click on Device in the menu bar to access the Device
menu.
2. Click on Bridge Status. In the resulting window click on the Bridge Port
button to access the Bridge Port menu.
3. Click on Configuration. The Fast Ethernet Configuration window,
Figure 2-14 , will appear.