ENFORCER Outdoor Stand-Alone/Wiegand Keypad with Proximity Reader
18
SECO-LARM U.S.A., Inc.
Duplicating Users to Other Keypads:
User data can be duplicated from one keypad to
other keypads (up to 10 at one time) that supports
this function. All user data will be transferred to the
second unit (taking about 3 minutes for 1,000
users), overwriting any existing user data.
Connect the keypads in parallel as shown in Fig. 1,
all wires to the same corresponding color.
Make sure that both keypads have the same
master programming code. To transfer user data,
use the following general formula from within base programming mode on the main keypad containing
the user data (see "Enter and Exit Base Programming Mode," pg. 7):
– Initiate User Data Transfer function code (LED will change to steady orange)
NOTES:
All keypads must support the data transfer function and have the same master programming code.
Any user data existing on the additional devices will be overwritten.
When transfer is complete, a short beep will sound, the LED will flash green once and change to red.
Exit programming mode by pressing the key after transfer is complete.
Wiegand Controller Mode:
The keypad can work as a controller connected to an external Wiegand reader.
Wiegand Controller Mode Wiring Diagram:
Wiegand
Reader
Orange – Output (N.C.)
Blue – Output (N.O.)
Yellow – Egress Input (N.O.)
Black – Ground (–)
Gray – Tamper Alarm Output (GND)
Purple – Output (COM)
Red – 12VDC (+)
12VDC
Power
Supply
(+)
Egress
Button
(–)
(+)
(–)
Or
Cathode
Electric
Lock
Output Relay
N.O. Output for Fail-secure Lock
N.C. Output for Fail-safe Lock
(+)
Alarm
(–)
Diode IN4007*
Door Sensor
Brown – Door Sensor Input
Green – Data 0
White – Data 1
GND
+12V
D0
D1
2
3
4
9
0
7
8
5
6
NOTE:
For DC-powered electric strikes, connect the included diode as close as possible and in parallel with
the electric strike. This absorbs possible electromagnetic interference to prevent operation of the strike
from damaging the reader/keypad. Do not connect a diode when using electromagnetic locks or with
AC powered strikes.
(+)
(–)
12VDC
Power Supply
Red
Black
Green (D0)
White (D1)
Fig. 1
2
3
4
9
0
7
8
5
6
2
3
4
9
0
7
8
5
6
To additional
units
