Endress ESE 1408 DGB ES DIN, Руководство по эксплуатации

Страница: 15 / 88

Status at: May 2015 ESE 1408 DBG ES DIN
15
The methods that will be used to install the generator on
these vehicle platforms require written approval from the
distributor that supplied the generator.
The generator is not to be connected up to other energy dis-
tribution systems (e.g. public power supply) or to other ener-
gy generation systems (e.g. other generators).
The generator is not to be used in explosion-prone environ-
ments.
The generator is not to be used in fire-prone environments.
The generator must be operated according to the specifica-
tions in the technical documentation.
Every inappropriate use or all activities on the generator
which are not described in these instructions are forbidden
misuse outside the legally defined limits of liability of the
manufacturer.
2.2.1 Residual risks
The points analysed and evaluated before beginning the
design and planning of the generator were the residual risks
using a risk analysis tool according to
DIN EN ISO
12100:2011-03 with DIN EN 12601:2011-07.
Residual risks which cannot be avoided by implementing
design measures during the whole life cycle of the generator
can be:

Risk of death

Risk of injury

Environmental hazards

Material damage to the generator

Material damage to other property

Limited performance or functionality
You can avoid existing residual risks by observing and fol-
lowing these guidelines:

the special warning notices on the generator

the general safety instructions given in these operating
instructions