Status at: May 2015
ESE 1408 DBG ES DIN
45
4.8 Monitoring the operating status using
the multifunction display
All LEDs light up for about 2 seconds to allow checking as
soon as the START-STOP switch
is set to the position “Op-
erate”. The normal operational lighting is then shown after-
wards for about 30 seconds. If the engine is not started with-
in this period, the E-MCS 4.0 goes into energy saving mode
and the indicator goes dark. To bring the E-MCS 4.0 back
into a ready-to-operate condition again, the START-STOP
switch must first be turned into the position “STOP”. The dis-
play intensity depends on the ambient light.
Figure 4-7: Multi-functional display
Displayed
(see Figure 4-7-(1))
when the generator starts or is
activated for 30 seconds when the START / STOP switch is
turned to the “Operate” position.
If the display is red
(see Figure 4-7-(16))
whilst the generator is
running then the temperature is too high and the generator
must be switched off.
Operating hours:
Ambient temperature:
Содержание ESE 1408 DGB ES DIN
