Endress ESE 1408 DGB ES DIN, Руководство по эксплуатации

Страница: 69 / 88

Status at: May 2015 ESE 1408 DBG ES DIN
69
2. Reinsert the dipstick and take it out again. Drain off some
of the oil if the level is above the upper mark and refill
with oil if the level is under the lower mark (see below).

The oil level has been checked.
Pour in oil as follows:
1. Remove oil screw plug
(Fig. 6-2-(1))
. Pull out the dipstick
for easier filling (
(Fig. 6-2-(2))
.
2. Fill with oil using a filling aid.
3. Check oil level and add oil if necessary.

The engine has been refilled with oil.
Fig. 6-3: Changing the oil
1. Unscrew the oil filter side plate
(Fig.6-3(1))
on the genera-
tor.
2. Pull out oil drainage hose
(Fig. 6-3-(2))
completely.
3. Direct oil drainage hose into an oil collection container.
4. Remove oil screw plug
(Fig. 6-3-(3))
.
Refilling with oil
WARNING!
The oil escapes immediately after opening the oil drain-
age valve.
Changing the oil
1
2
3