E.F. Johnson Company MULTI-NET II Скачать руководство пользователя | Manualshive

Страница: 1 / 27

background image

MULTI-NET

®

II

VIKING

®

CM

FM TWO-WAY
PORTABLE RADIO

Part No. 002-8585

-378

3-98hph

Printed in U.S.A.

SAFETY INFORMATION

The FCC has adopted a safety standard for human exposure to RF energy. Proper operation of this
radio under normal conditions results in user exposure to RF energy below the Occupational Safety
and Health Act and Federal Communication Commission limits.

WARNING

DO NOT operate the transmitter with the antenna less than 24 cm (about 10 inches) from the eyes,
face, or any exposed body part.

DO NOT operate the radio in explosive or flammable atmospheres. The transmitted energy could
trigger blasting caps or cause an explosion.

DO NOT operate the radio without the proper antenna installed.

DO NOT allow children to operate or play with this radio.

NOTE: The above warning list is not intended to include all hazards that may be encountered when
using this radio.

This device complies with Part 15 of the FCC rules. Operation is subject to the condition that this device does not cause
harmful interference. In addition, changes or modifications to this equipment not expressly approved by Transcrypt
International, Inc. could void the user’s authority to operate this equipment (FCC rules, 47CFR Part 15.19).

LAND MOBILE PRODUCT WARRANTY- The manufacturer’s warranty statement for this product is available
from your product supplier or from the E.F. Johnson Company, 299 Johnson Avenue, Box 1249, Waseca, MN
56093-0514. Phone (507) 835-6222.

Copyright



1998 by the E.F. Johnson Company

E.F. Johnson Company, which was founded in 1923, designs, manufactures, and markets radio communication prod-
ucts, systems, and services worldwide. E.F. Johnson produces equipment for land mobile radio and mobiletelephone
services which include business, industrial, government, public safety, and personal users.

1
2
3
...
»

Содержание MULTI-NET II




























Отзывы:

Нет отзывов

Похожие инструкции для MULTI-NET II

Бренд: Axxion Страницы: 3

Бренд: Jabra Страницы: 2

Бренд: Hama Страницы: 14

Бренд: Audiovox Страницы: 37

Бренд: Sun-Mate Страницы: 14

Бренд: EVOLV Страницы: 15

Бренд: mikroElektronika Страницы: 3

Бренд: Briggs & Stratton Страницы: 8

HDG2000B Series

Бренд: Hantek Страницы: 100

Бренд: Caliber Страницы: 18

Бренд: Miller Страницы: 56

Бренд: TTI Technologies Страницы: 14

Бренд: Tactec Страницы: 19

Бренд: Wacker Neuson Страницы: 200

Modular Power Series

Бренд: ICT Страницы: 91

Бренд: Philips Страницы: 2

Бренд: AEG Страницы: 98

Бренд: AEG Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды