E.F. Johnson Company MULTI-NET II Скачать руководство пользователя страница 9

Страница: 9 / 27

Indicates that the low-power mode has been selected by the menu selected by turning power on with the Auxiliary

switch pressed. To enable low power, select LO PWR (press PTT switch), and to enable high power, select HI PWR. (If
the transceiver is not a selectable power model, no power change occurs.)

SCN

Indicates that the scan mode has been selected by the SCN key. If this indicator is flashing, the Multi-Net auto-

registration feature is searching for another system (see “Auto-Registration” description).

Indicates that the transmitter is on. The red indicator on the top panel also lights when the transmitter is on.

PHON

Indicates that the phone mode has been selected by the PHON or SEND key.

(Battery)

Indicates that the battery needs recharging. A beep also sounds when the push-to-talk switch is released if this indi-

cator is on (see “Low Battery Indicator”).

MON

Indicates that the monitor mode is enabled by the Auxiliary switch when a conventional system is selected. This

mode disables Call Guard squelch so that all messages are heard. To disable monitoring, press the Auxiliary switch
again.

CALL

Indicates that a call has been received. To turn this indicator off, press any key.

BUSY

Indicates that the group (channel) is busy with other traffic when a conventional system is selected.

(Handset)

Indicates that the displayed group is programmed for telephone calls.

STANDARD CALLS

Introduction

Standard calls are all calls to other mobiles or control stations assigned to your site. These calls differ from tele-

phone and special calls in that no number is dialed. Calls on conventional systems are always standard calls.

Содержание MULTI-NET II




























Результаты поиска

Содержание MULTI-NET II

Отзывы:

Бренды по названию

Популярные бренды

E.F. Johnson Company MULTI-NET II, Краткое руководство пользователя

Результаты поиска

Содержание MULTI-NET II

Отзывы:

Бренды по названию

Популярные бренды