DISPLAY INFORMATION
The following information appears at various times in the transceiver display. To view all the information in the
display, turn power on with the backlight switch pressed. (Normal operation resumes when the switch is released.)
Alphanumeric Display
In the standard (non-phone) mode, this area of the display (SYST-ID) indicates either the 7-character system or 5-
character group identification (the group identification is available only on Multi-Net systems). In the phone mode, it
indicates the telephone number. Operating modes and error conditions are also displayed in this area (see “Display
Messages”).
System Display (SYS)
Indicates the selected system number.
Group Display (GRP)
Indicates the selected group number.
—
This symbol next to “SYS” indicates that the displayed system has been deleted from the scan list by the LCK key
(locked out). When it is displayed next to “GRP”, it indicates that the displayed group has been deleted. The lock indi-
cation also appears when system or group scanning if any scanned system or group has been deleted (see “Scan List
Programming” description).
(Arrow)
Indicates that the left-most digits of the telephone number are not shown because the number is longer than 7
digits. To briefly display the overflow digits, press RCL 0.
(o)
Indicates that optional voice encryption is enabled on the displayed group. This feature is manually turned on or
off by pressing 2ND OPT (RTN LCK).
U
Indicates that the group is programmed for Multi-Net unique ID calls.
MUTE
Indicates that the key press tone has been muted by the menu that is selected by turning power on with the Auxil-
iary switch pressed. To disable this tone, select KP_MUTE (press PTT switch); to re-enable this tone, select KP_ENAB.
QLK
Indicates that the current quick select switch position is locked and cannot be user programmed.
