MISCELLANEOUS
System Operator Programming
As noted in the descriptions of many of the features of this transceiver, programming by your system operator may
determine availability and how they operate. If you require more information on how a particular feature operates,
contact your system operator. The only user-programmable features of this transceiver are the quick select switch
system/groups and the seven telephone numbers (if your transceiver is equipped with the optional telephone keypad).
However, even some of this information number may not be user programmable if the position has been locked by your
system operator (see “Quick Select Switch” and “Telephone Calls”).
Setting Volume Level
This transceiver does not have a squelch control that can be turned to enable background noise for use in setting
the volume level. However, if the key press tone is enabled, any key can be pressed and a beep will sound that is repre-
sentative of the current volume level. The index on the volume knob can also be used to determine the current volume
setting.
Display Messages
Messages may appear in the display which indicate operating modes and error conditions. The messages that may
be displayed are as follows. Refer to the related descriptions in this manual for more information.
NO SITE -
Indicates
an out-of-range condition. The intercept tone also sounds when this message is displayed. To correct this condition so
that calls can again be placed, you must get closer to your repeater site. This message is displayed in the Multi-Net
mode only.
BUSY - Indicates that the system being accessed is busy. Calls cannot be placed until the system becomes available.
Refer to “Clear-To-Talk” description for more information. This message is displayed only in the Multi-Net mode.
TX TIME - Indicates that the transmitter has been disabled by the time-out timer.
TX DSBL - Indicates that transmitting is not allowed on the selected group because it has been programmed as re-
ceive-only. This message is displayed in the conventional mode only.
TX INHIB - Indicates that the selected group is temporarily busy. This message is displayed in the Multi-Net mode
only.
SYN ERR - Indicates a frequency synthesizer error. Refer to “Equipment Servicing”.
PRG ERR - Indicates that no transmit frequency has been programmed for the selected system. Refer to “Equipment
Servicing”.
RX PRI1 - Indicates that a call has been received on the first priority group (see “Priority Calls”). Press any key to
turn it off. This message is displayed in the Multi-Net mode only.
RX PRI2 - Indicates that a call has been received on the second priority group (see preceding description).
IN SCAN - Indicates that system scanning is occurring.
KP_LOCK - Indicates that the keypad has been disabled (see “Keypad Disable”).
