Endress+Hauser Smartec CLD18, Руководство по эксплуатации

Страница: 32 / 48

Commissioning Smartec CLD18
32 Hauser
Calibrating the cell constant
‣
With this type of calibration, enter a reference value for the conductivity.
 In the result, the device calculates a new cell constant for the sensor.
First switch off the temperature compensation:
1. Select the menu Setup / Extended setup / Input / Temp. comp. .
2. Off Select .
3. Return to the menu Setup .
Perform the calculation of the cell constant as follows:
1. Select the menu Calibration / Cell const. .
2. Cond. ref. Select and enter the value of the standard solution.
3. Place the sensor in the medium.
4. Start the calibration.
 " Wait calib. " - wait for calibration to end. The new value is displayed after the
calibration.
5. Press the Plus key.
 " Save calib data? "
6. Yes Select .
 " Calib successful "
7. Switch the temperature compensation back on.