Endress+Hauser Smartec CLD18, Руководство по эксплуатации

Страница: 26 / 48

Commissioning Smartec CLD18
26 Hauser
8.3 Configuring the measuring device
1. Use the 'E' key to call up the main menu.
2. Navigate through the available menus with the '+' and '–' keys.
3. Press the 'E' key to open the desired menu.
4. Use the option,
Back which can be found at the bottom of each menu, to move up a
level in the menu structure.
Default settings are in bold.
Parameter Possible settings Description
Current range 4-20 mA
0-20 mA
‣
Select the current range.
Out1 0/4 mA 0 to 2000000 μS/cm
0 μS/cm
‣
Enter the measured value at which the min. current value (0/4 mA) is
present at the transmitter output.
Out1 20 mA 0 to 2000000 μS/cm
0 μS/cm
‣
Enter the measured value at which the max. current value (20 mA) is
present at the transmitter output.
Out2 0/4 mA -50 to 250 °C
0.0 °C
‣
Enter the measured value at which the min. current value (0/4 mA) is
present at the transmitter output.
Out2 20 mA -50 to 250 °C
100.0 °C
‣
Enter the measured value at which the max. current value (20 mA) is
present at the transmitter output.
Damping main 0 ... 60 s
0 s
Damping value for the conductivity measured value
Extended setup

Advanced settings→  26
Manual hold Off , On Function for freezing the current and alarm outputs
8.4 Advanced settings
1. Use the 'E' key to call up the main menu.
2. Navigate through the available menus with the '+' and '–' keys.
3. Press the 'E' key to open the desired menu.
4. Use the option,
Back which can be found at the bottom of each menu, to move up a
level in the menu structure.
Default settings are in bold.
Parameter Possible settings Description
System General settings
Device tag Customized text
Max. 16 characters Enter the device designation