Endress+Hauser Liquistation CSF34 Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 210

Endress+Hauser Liquistation CSF34 Скачать руководство пользователя страница 70

Operation

Liquistation CSF34

70

Hauser

Menu/Setup/General settings/

Function

Options

Info

Time

00-01:00 to 00-23:59

Factory setting

00-04:00

Duration

00:01 to 02:00

Factory setting

00:05

10.2.6 Extended setup

Diagnostics settings

The list of diagnostic messages displayed depends on the path selected. There are device-

specific messages, and messages that depend on what sensor is connected.

Menu/Setup/(General settings or Inputs<Sensor channel>)/Extended setup/Diagnostics settings/Diag.
behavior

Function

Options

Info

List of diagnostic messages

‣

Select the message to be changed. Only then
is it possible to make the settings for this
message.

Diag. code

Read only

Diagnostic message

Selection

• On
• Off

Factory setting

Depends on the message

Deactivate the diagnostic message or activate it
again.
Deactivating means:
• No error message in the measuring mode
• No failure current at the current output

Failure current

Selection

• On
• Off

Factory setting

Depends on the message

‣

Decide whether a failure current should be
output at the current output if the diagnostic
message display is activated.



In the event of general device errors, the
failure current is output at all the current
outputs. In the event of channel-specific
errors, the failure current is only output at
the assigned current output.

Status signal

Selection

• Maintenance (M)
• Out of specification (S)
• Function check (C)
• Failure (F)

Factory setting

Depends on the message

The messages are divided into different error
categories in accordance with NAMUR NE 107.

‣

Decide whether a status signal assignment
should be changed for the application.

Diag. output

Selection

• None
• Alarm relay
• Binary output
• Relay 1 to n (depends on

the device version)

Factory setting

None

Select a relay output and/or binary output to
which the diagnostic message should be
assigned.
For sensors with the Memosens protocol: A relay
output must first be configured for

Diagnostics

before it is possible to assign the message to an
output.
(

Menu

/

Setup

/

Outputs

: Assign the

Diagnostics

function and set

Operating mode

to

as

assigned

.)



Alarm relays are available, depending on the device version.

«
...
68
69
70
71
72
...
»

Содержание Liquistation CSF34



















































































































































































































Отзывы:

Нет отзывов