Endress+Hauser Liquistation CSF34, Руководство по эксплуатации, Страница: 170 / 210

Diagnostics and troubleshooting Liquistation CSF34
170 Hauser
Menu/Diagnostics/System test
Function Options Info
Overcurrent Read only No: no error
Yes: the fan is defective
‐
> Contact the Service Department
Sample compartment Read only The current temperature of the sample
compartment is displayed.
Sample compartment Read only When you start the heating test, the
temperature at the start time is displayed
Heating test off or Heating test on -> progress is displayed
Start Test Action Start the heating test.
Stop test Action End the heating test.
Manual sampling
Bottle configuration Read only
Bottle configuration Read only
Bottle configuration Selection
• Front
• Bottle 1
...
• Back
Select which bottle should be filled with the
sample.
Sample volume 50 to 2000 ml
10 to 10000 ml
Factory setting
100 ml
You can change the sample volume in the
version with the peristaltic pump. The sample
volume can be changed.
Sample volume Factory setting
200 ml
The sample volume is preset at the factory in the
version with the vacuum pump.
Start sampling Action
Peristaltic pump
Pump purge Action
Pump purge, to stop
press ESC Read only
Current pump
operating time Read only
Power supply Read only The current supply voltage is displayed.
With AC power supply: 24 V ±0.5 V
With DC power supply: 22 to 28 V
Motor current Read only The current consumption of the pump is
displayed.
Vacuum Read only The vacuum is an indicator of the suction height.
-> 100 mbar corresponds to approx. 1 m suction
height
Medium detected Read only Yes: the medium was detected
No: no medium was detected
Pump suction Action
Pump suction, to stop
press ESC Read only
Current pump
operating time Read only
Power supply Read only The current supply voltage is displayed.
With AC power supply: 24 V ±0.5 V
With DC power supply: 22 to 28 V
Motor current Read only The current consumption of the pump is
displayed.