Endress+Hauser iTEMP TMT182, Руководство по эксплуатации

Страница: 33 / 36

TMT182 7 Maintenance
Hauser 33
Terminals • Cable up to max. 16 AWG (secure screws)
• or 16 AWG with wire end ferrules
• eyelets for easy connection of a HART
®
-handheld terminal with alligator clips
10.9 Human interface
Display elements No display elements are present directly on the temperature transmitter.
The measured value display can be called up using the ReadWin
®
2000 or COMMUWIN II PC soft-
ware.
Operating elements No operating elements are present directly on the transmitter to prevent from manipulation. The
device parameters of the head transmitter are configured using the DXR275, DXR375 handheld ter-
minal or a PC with Commubox FXA191 and operating software (e.g. COMMUWIN II or
ReadWin
®
2000)
Remote operation Configuration
Handheld terminal DXR275, DXR375 or PC with Commubox FXA191 and operating software
(ReadWin
®
2000 or COMMUWIN II).
Interface
PC interface RS232 and Commubox FXA191.
Configurable parameters
Sensor type and connection type, engineering units (°C/°F), measurement range, internal/external
cold junction, compensation of wire resistance with 2-wire connection, failure mode, output signal
(4 to 20/20 to 4 mA), digital filter (damping), offset, TAG + descriptor (8 + 16 characters), output
simulation, customer specific linearization, min./max. process value indicator function
10.10 Certificates and approvals
CE-Mark The measurement system fulfills the requirements demanded by the EU regulations. Hau-
ser acknowledges successful unit testing by adding the CE mark.
Hazardous area
approvals • FM IS, Class I, Div. 1+2, Group A, B, C, D / FM NI, Class I, Div. 2, Group A, B, C, D
• CSA IS, Class I, Div. 1+2, Group A, B, C, D
• ATEX II1G EEx ia IIC T4/T5/T6
• ATEX II3G EEx nA IIC T4/T5/T6
• ATEX II3D in compliance with EN 50281.1
GL Ship building approval (Germanischer Lloyd)
UL Recognized component to UL 3111-1
CSA GP CSA General Purpose
Other standards and
guidelines • IEC 60529: Degrees of protection by housing (IP-Code)
• IEC 61010: Safety requirements for electrical measurement, control and laboratory instrumenta-
tion.
• IEC 61326: Electromagnetic compatibility (EMC requirements)
• NAMUR: Standardization association for measurement and control in chemical and pharmaceu-
tical industries. (www.namur.de)
• NEMA: Standardization association for the electrical industry