4 Wiring
TMT182
12
Hauser
4
Wiring
4.1
Overview
Wiring overview
Terminal layout
ƒig. 6:
: Head transmitter wiring
4.2
Measurement unit connection
Measurement unit
connection
"
Caution!
Switch off power supply before opening the housing cover. Do not install or connect the unit to
power supply. If this is not followed parts of the electronic circuit will be damaged.
4.2.1
Sensors
Connect the sensor cables to the respective head transmitter terminals (Terminals 3 to 6) by follo-
wing the wiring diagram (see fig. 6).
4.2.2
Output signal and power supply
Open the cable gland on the head transmitter or field housing. Feed the cable through the opening
in the cable gland and then connect the cable wires to terminals 1 and 2 according to the wiring
diagram (see fig. 6).
!
Note!
The screws on the terminals must be screwed in tightly.
