TMT182
1 Safety notes
Hauser
9
2.2
Registered trademarks
• HART
®
Registered trademark of HART
®
Communication Foundation, Austin, Tx, USA
• PROFIBUS
®
Registered trademark of PROFIBUS Nutzerorganisation e. V., Karlsruhe, Germany
• Microsoft
®
Windows NT
®
and Windows
®
2000
Registered trademarks of Microsoft Corporation, Redmond, USA
• iTEMP
®
and ReadWin
®
2000
are registered trademarks of Hauser Wetzer GmbH + Co. KG, Nesselwang, Germany
2.3
Delivery contents
Delivery contents
The delivery contents of a temperature head transmitter are as follows:
• Head transmitter TMT182
• Installation screws, installation springs and E-ring
• Operating instructions
• Control drawing for use in hazardous areas
!
Note!
Please take note of the head transmitter accessories in chapter 8 "Accessories".
3
Installation
3.1
Installation conditions
Installation conditions
• When installing and operating the unit, please take note of the allowable ambient
temperature (see chapter 10 "Technical Data").
• When using the unit in a hazardous area, the limits indicated in the certification must be adhered
to (see control drawing).
Dimensions
The head transmitter dimensions can be found in chapter 10 "Technical Data".
Installation point
• Sensor connection head to DIN 43 729 Form B
• Field housing
Installation angle
There are no limits as to the angle of installation.
