Emerson Rosemount 700XA, Справочное руководство

Страница: 70 / 294

The Browse dialog window displays.
f) Navigate to the Rosemount MON2020 install directory (typically C:\Program
Files (x86)\Emerson Process Management\MON2020 ) and select Daniel Direct
Connection.inf
.
g) Click
Open
.
You return to the Install from Disk dialog window.
h) Click OK .
You return to the Add Hardware Wizard .
i) Click Next .
j) Select an available serial port and click Next .
The Hardware Installation dialog window displays.
k) Click Continue Anyway .
After the driver is installed, you return to the Add Hardware Wizard .
l) Click Finish .
You return to the Phones and Modems dialog window. The Daniel Direct
Connect modem should be listed in the Modem column.
2. Start Rosemount MON2020 and do the following to create a GC connection for the
Daniel Direct Connection modem:
a) Go to
File
→
GC Directory...
.
The GC Directory window displays.
b) Select
Add
from the GC Directory window’s File menu.
A New GC row is added to the bottom of the table.
c) Select the New GC text and type a new name for the GC connection.
d) Select the new GC’s
Direct
check box.
e) Click the
Direct
button located at the bottom of the GC Directory window.
The Direct Connection Properties window displays.
f) Select
Communications cable between two computers
(COM n ) from the
Port dropdown menu.
Note
The letter n stands for the COM port number.
g) Select 57600 from the Baud Rate dropdown menu.
h) Click OK to save the settings.
You return to the GC Directory window.
i) Click OK to save the new GC connection and to close the GC Directory
window.
3. Connect one end of the direct connect cable to the GC’s serial port at
J23
on the
backplane.
Installation and start-up Reference Manual
June 2022 2-3-9000-744
70 Emerson.com/Rosemount