3.16
SSW hygienic tank spud seal
Figure 3-19: SSW Tank Spud Seal
A
B
C
D
A. Connection to transmitter
B. Extension lenght
C. Diaphragm
D. Tank spud
3.16.1
Parts required for installation
The parts required to install the SSW hygienic tank spud seal will be defined here. Prior to
installation, you will need the following:
•
O-ring (Emerson-supplied)
•
Clamp (Emerson-supplied)
Cutting and welding equipment required if installing a new tank spud.
Verify the O-ring material is appropriate for the application.
3.16.2
Installation steps
Follow these steps to install the SSW hygienic tank spud seal:
Procedure
2. Weld the tank spud onto the tank per plant procedures, see
. Ensure the
tank spud is not assembled to the pressure transmitter and/or the remote seal prior
to welding.
3. Remove the protective cover from the diaphragm of the remote seal. Use extreme
caution during installation to ensure the diaphragm is not damaged.
Reference Manual
Installation
00809-0100-4002
May 2020
Rosemount DP Level
51
Содержание Rosemount 1199
