manualshive.com logo in svg

Emerson AMS Trex, Руководство пользователя

Поделиться
Скачать
Emerson AMS Trex Скачать руководство пользователя страница 97

3.14.8

Send a configuration to a connected HART device

Prerequisites

You must have at least one configuration saved in the Trex unit for the connected device
type.

Procedure

1.

Connect to the HART device.

2.

Tap the 

Menu

 tab in the application bar.

3.

Tap 

Send Config

.

4.

Select a saved configuration, and tap 

OK

.

5.

Review the parameters, and tap 

Send

.

3.14.9

Save a configuration from a HART device

You can save a copy of the configuration from the connected device. The configuration has
only non-dynamic parameters.

Procedure

1.

Connect to the HART device.

2.

Tap the 

Menu

 tab.

3.

Tap 

Save Config

.

4.

Enter a filename for the configuration, and tap 

OK

.

The configuration is saved in the Trex unit.

3.15

Offline HART configurations

The Trex unit lets you work with HART configurations. You can create, edit, copy, delete,
and rename configurations.

If you are not connected to a HART device, an Offline Config button displays on the main
Field Communicator menu. You can edit and store a configuration on the Trex unit.

If you are connected to a HART device, you can either Save Config to the Trex unit, or Send
Config to the connected device.

You can also back up the configurations to a PC by using the Configuration Management
application. For more information, see the Help included with the Configuration
Management application.

Note

Do not edit a configuration on the Trex unit while you are connected to the Configuration
Management PC application.

Field Communicator application

User Guide 

89

Содержание AMS Trex























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды