manualshive.com logo in svg

Emerson AMS Trex, Руководство пользователя

Поделиться
Скачать
Emerson AMS Trex Скачать руководство пользователя страница 116

Note

You cannot schedule IO blocks when the device is commissioned or a host/linking device is detected
on the fieldbus segment. To schedule IO blocks, use the host system or remove the device from the
fieldbus segment and connect it directly to the Trex unit.

Procedure

1.

Connect to the FOUNDATION fieldbus device.

2.

Tap the 

Service Tools

 tab.

3.

Tap 

Write IO Block Schedule

.

4.

Tap 

OK

.

5.

Tap 

Yes

 or 

No

 when asked if the device is commissioned.

You cannot schedule blocks if the device is commissioned.

6.

Select the appropriate macrocycle duration.

7.

Select the appropriate IO blocks.

8.

Tap 

OK

.

This schedules the blocks and sets the block mode to Auto.

View the status of a block

Different devices have different options associated with them, and the selections on these
menus vary accordingly. See the device documentation for more information on
supported menu items.

Procedure

1.

Connect to the FOUNDATION fieldbus device.

2.

Tap the desired block.

3.

Tap 

Status

.

Status parameters are displayed.

3.21.3

Run a method

Different devices have different methods associated with them, and the selections on
these menus vary accordingly. See the device documentation for more information on
supported menu items.

Procedure

1.

Connect to the FOUNDATION fieldbus device.

2.

Tap the desired block. (Typically, methods are run in the transducer block.)

3.

Tap a menu containing methods. The menu options will vary for each device.

4.

Tap the type of method you want to run, such as calibration or diagnostic. Follow
the prompts on the screen to run the method.

Field Communicator application

108

User Guide

Содержание AMS Trex























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды