manualshive.com logo in svg

Emerson AMS Trex, Руководство пользователя

Поделиться
Скачать
Emerson AMS Trex Скачать руководство пользователя страница 50

Procedure

1.

In Upgrade Studio, click 

Login

 > 

Create an Account

.

A web browser opens.

2.

Enter your information.

3.

Click 

Submit

.

4.

Wait for notification via email that the user account is available.

5.

Follow any additional steps described in the notification email.

2.14.3

Activate the Trex unit

The Trex unit displays an activation reminder message each time you power on the Trex
unit until it is activated. Activation enables the full functionality on the Trex unit and
associates the Trex unit with your user account/company.

Upgrade Studio can activate the Trex unit with or without an internet connection. The
procedure below is for PCs with an internet connection.

Prerequisites

Create a user account in Upgrade Studio.

Procedure

1.

Connect the Trex unit to the PC where Upgrade Studio is installed.

2.

In Upgrade Studio, click 

Activate Units

.

3.

Click 

Login

.

4.

Enter your username and password, if prompted, and click 

Login

.

Logging in enables Upgrade Studio to retrieve the correct activation code for the
Trex unit. If you do not log in, you need to click the "Don't have an activation code?"
link to request an activation code. When you receive the activation code, enter or
copy/paste the code onto the Activate Units screen.

5.

Click the Trex unit displayed on the left side of the screen.

6.

Click 

Activate

.

A message confirming the activation was successful is displayed.

2.14.4

Activate the Trex unit without using an internet

connection

Prerequisites

To activate the Trex unit without using an internet connection, request an activation code
by emailing Emerson at [email protected] or calling 888-367-3774 option 2
(U.S. and Canada) or +63.2.702.1111 (worldwide) and providing the serial number. The

AMS Trex Device Communicator overview

42

User Guide

Содержание AMS Trex























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды