Emerson AMS Trex, Руководство пользователя

Страница: 37 / 214

3. Ensure the
Wireless Networks
option is set to
ON
.
The wireless communication is enabled.
4. Tap the network you want to connect to. You can tap to the right or left of the
network name.
5. Tap
Connect
, and enter credentials if prompted.
Once connected, a checkmark is displayed next to the name of the network to show
it is connected to the network. The wireless icon in the status bar changes to .
Connect the Trex unit to a non-broadcasting wireless
network
You can connect to a wireless network that is non-broadcasting by manually entering
required options when in range.
Procedure
1. Tap Settings or the status bar at the top of the screen.
2. Tap
Wi-Fi
.
3. Ensure the Wireless Networks option is set to ON .
This enables the wireless radio in the Trex unit.
4. Tap
Add Wi-Fi Network...
.
5. Edit the following options as needed. You may need assistance from your network
administrator.
Option Description
Network SSID The name of the wireless network.
Security
The type of security used for the wireless network.
6. Tap Connect .
Depending on the network security, you may need to enter credential information
when the network is in range.
Enter a network address for an AMS Trex unit
You can specify how an AMS Trex unit connects to your network. Enter DHCP to allow a
network address to be assigned, or Static to specify an IP address and/or Subnet Mask.
Contact your network administrator before changing settings. Ensure the port you are
sending to is configured to receive AMS Trex data.
AMS Trex Device Communicator overview
User Guide 29