34
Install - Step 13
Next Steps
Set up a Navisphere domain
The first time you log in to the storage system, you will be prompted to add the
storage system to a Navisphere domain. If this is the first storage system, create a
new domain. If there are additional storage systems you can create a new domain or
add it to an existing domain.
Commit software
If no new updates were installed during step 6, the FLARE software will need to be
committed.
Open Navisphere Manager and right-click the storage system; click Properties, then
the software tab.
If the software needs committing, click the Commit button.
Set cache settings
To set the cache settings, open Navisphere Manager, right-click the storage system
and choose Properties. On the Memory tab set the write cache to the maximum
allowed and then allocate the remainder to read cache; then click Apply.
On the cache tab, place a check in each of the read and write boxes, set the
watermark settings to 60% for low and 80% for high and click Apply.
Enable Access Logix
If more than one server will connect to the storage system, you must enable Access
Logix. To enable Access Logix, open Navisphere Manager and right-click the storage
system; click Properties and then the storage access tab; next check the Access
Control Enabled
box and click Apply.
Additional protocol
If you choose to deploy both Fibre Channel and iSCSI connections, follow the
instructions to install the other protocol starting in Step 7 (page 24 for iSCSI or page
18 for Fibre Channel).