20
Install - Step 8 (Fibre Channel)
Set up Fibre Channel switches
If your configuration includes Fibre Channel switches, install or upgrade any switch
software or patches on those connected to the storage system and the servers. (If
your configuration does not include a switch, skip this step.)
"Ease of Use" switches
Use the "Ease of Use" zoning wizard to guide you through setting up the switch,
cabling, and zoning the hosts to the storage system.
If you use the zoning wizard, skip the next step (Step 9) of this guide and continue with
"Register the Fibre Channel HBAs" on page 22
.
Standard switches
Install the switch and set the switch's IP address. For instructions, use the installation
manuals that shipped with the switch or that are available on the switch vendor’s
website. The next section will guide you through cabling and zoning your switch.
