SoM-A5D36 User Manual
Revision 1.30 © 2015
- 4 -
1
Introduction
This document describes EMAC’s
SoM-A5D36 System on Module (SoMs). The SoM-A5D36 is a System on
Module, designed to be compatible with EMAC’s 200
-pin SODIMM form factor. This module is built
around the ATSAMA5D36 ARM based microcontrollers, which provides several of its key features.
The SoM-A5D36 has an onboard Gigabit Ethernet PHY, 6 serial ports, an RTC, onboard eMMC flash, Serial
NOR Flash, and SDRAM. In addition to the standard SoM features, the SoM-A5D36 also features a fast
32-bit core, open source software support, and a wide range of controller I/O pins.
1.1
Features
▪
Small, 200 pin SODIMM form factor (2.66" x 2.384")
▪
Atmel ARM Cortex-A5 ATSAMA5D36
536MHz Processor
▪
10/100/1000 BaseT Ethernet with on-board PHY
▪
RMII Interface for additional 10/100 BaseT PHY
▪
6 Serial ports, one with full handshake and 3 with RTS/CTS handshake
▪
2 USB 2.0 (High Speed) Host port
▪
1 USB 2.0 (High Speed) OTG Host/Device port
▪
Up to 512 MB of LPDDR2 SDRAM
▪
4 GB of eMMC Flash
▪
16 MB of NOR Serial Flash
▪
2 SD/MMC Flash Card Interfaces
▪
Battery-backed Real-Time Clock
▪
2 SPI ports
▪
2 I2C ports
▪
1 I2S Audio port
▪
2 CAN ports
▪
6-Channel 12-bit Analog-to-Digital converter
with 4-wire Touchscreen Interface
▪
Image Sensor Interface (ISI), ITU-R BT. 601/656
▪
Timer/Counters and Pulse Width Modulation (PWM) ports
▪
Graphic LCD Interface with 2D acceleration with 2048x2048 Resolution or up to 720p
▪
32-bit True Random Number Generator
▪
Typical power requirement less than 1 Watt
▪
JTAG for debug, including real-time trace
▪
FREE Qt Creator IDE with GCC & GDB development tools
