8
Quick start
Copyright eltima electronic 2022
Quick start
A chapter for those in a hurry…
Inserting the batteries
Open the battery cover on the backside of
the controller, Figure 1.
Insert three cells of the type AA/LR6 in the
battery compartment. Put them into the
outer slots first, then into the middle one,
see Figure 2.
Please observe the polarity!
Close the battery cover.
Setting up the light barrier
Plug one of the light barriers into the plug 1.
Mount the light barrier and one reflector on a tripod each.
Place the light barrier and reflector opposite
to each other at a distance of about 1 m, see
Figure 3.
Note: This distance is arbitrary and is neither the smallest nor the
greatest distance between light barrier and reflector that can be
achieved.
Turn on the jok
e
r
²
controller by pressing the
button for at least 2 seconds. The display
will show the working level, see Figure 4,
marked by the
icon.
Touch the
button. The alignment level will
show, marked by the
icon, see Figure 5.
Figure 1: Opening the bat-
tery cover
Figure 2: Inserting the bat-
teries
+
+
+
-
-
-
Figure 3: Setting up the
light barrier
Figure 4: Working level
Figure 5: Alignment level