11
Operating concept of the joker² controller
Copyright eltima electronic 2022
Changing a parameter value
The basic procedure to change a parameter value is described for the param-
eters for output level a as an example.
To select a parameter, move the cursor up and down using the
or
keys, see Figure 8.
Touch the
button, the cursor will move to the parameter value. If the
parameter value is a multi-digit number, the cursor moves to the highest
digit. You can reach the desired digit of a number using the
or
key,
see Figure 9.
For some parameters the units can also be set (µs=microseconds,
ms=miliseconds, s=seconds or m=minutes). Use the
key to get to
the units.
To change a digit or units touch the
or
key, see Figure 9.
To save the change, touch the
button.
To discard the change, touch the
button.
The action modes in the basic level are changed in the same way as other
parameters. Select the action mode parameter in the parameter level the
basic mode and touch the
button. Change the action mode touching the
or
button.
Figure 8: Selecting a parameter
Figure 9: Selecting a parameter
value
1 s
µs
9
