elsner elektronik 71280, Установка и настройка

Страница: 15 / 48

13 Views and device operation
Nunio KNX M-T push button • Status: 25.02.2021 • Technical changes reserved. Errors reserved.
Change target temperature
The target value for the active heating or cooling mode is displayed (Fig. 9b, No. 4)
and can be changed with +/- (Fig. 9b, No. 5+6).
In the device application (temperature controller, ETS), however, it can be spec-
ified that the target cannot be changed for each mode. If the manual modification
of the nominal value is blocked in one mode, the symbol "Manual blocked" is
briefly shown when an attempt is made to modify the value.
The increment and the possible setting range are also specified in the application's
temperature controller. Whether the manually changed values are retained after a
mode change (e.g. Eco mode over night), or if the stored values are reapplied, is also
defined here.
Change mode
Tap the Mode symbol (Fig. 9b, No. 7) in order to display the possible operating modes
one after another. This causes a frame around the symbol to flash. To confirm the se-
Fig. 9 a
1
To the temperature controller menu
1 2
5 6
3
4
7 8
Button display Temperature controller menu
Fig. 9 b
2
Return to scanner
3 Temperature controller labelling
field (free text)
4 Target value display (value of the ac-
tive mode)
5 - Lower target value
6 + Increase target value
7 Mode display and selection
8 Fan controls (optional)