elsner elektronik 71280, Установка и настройка

Страница: 14 / 48

12 Views and device operation
Nunio KNX M-T push button • Status: 25.02.2021 • Technical changes reserved. Errors reserved.
If the area function in the ETS is disabled, the keys can be used normally at any time.
5.4. Temperature controller menu
If the temperature controller of the Nunio KNX M-T is used, a temperature controller
menu can be represented. The temperature controller menu must be activated in the
ETS.
An area °C is then shown at the top right of the button display. Tap it to open the tem-
perature controller menu.
Key function readiness
Key function readiness
Fig. 8
V area = virtual area
0s 0.2s 5.2s
V area 3
Key X
Key X
Design
Function Y
Key function readiness
Readiness
0.5 s block
V area 4
Design
Area function
Key Y
Design
Function X
a)
b)
c)
d)
V area 1
V area 2 0.5 s block
Design
Area function
Area function examples
Examples of normal key functions
Area function
(V area 3)
(V area 2)
(V area 1)