elsner elektronik 71280, Установка и настройка

Страница: 39 / 48

37 Setting the parameters
Nunio KNX M-T push button • Version: 25.02.2021 • Technical changes and errors excepted.
Push button as dimmer
If the push button should be used as a dimmer, select the function "Dimmer" and de-
fine the push button function, time interval (switching/dimming) and if required, the re-
peat interval for extended pressing of the push button.
Push button as 8 bit encoder
If the push button is to be used as an 8-bit encoder, select the function "8-bit encoder"
and define which value is to be transmitted.
Push button as 16 bit encoder
If the push button is to be used as a 16-bit encoder, select the function "16-bit encoder"
and define which value is to be transmitted.
Push button as scenario control
If a scenario is to be recalled and saved with a push button, select the "Recall scenario
/ Save scenario" function and specify whether the push button should also be used to
save the scenario (press longer)
Function Dimmer
Command • Brighter
• Darker
• Lighter/Darker
Time between switching and dimming
(in 0.1 s) 0 ... 50; 5
Repeat the dim command No • Yes
Repeat the dim command with a long hold
of the button every 0.1 s • ... • every 0.5 s • ... • every 2 s
Dim by 100% • ... • 6% • ... • 1.5%
Range • 0 ... 255
• 0% ... 100%
• 0° ... 360°
Value • 0... 255
• 0 ... 100
• 0°... 360°
Value (in 0.1) -6707600 ... 6707600; 0
Scenario (0-63, corresponds to scenario no.
1-64) 0 ... 63
Scenario function Call up • Call up and storage
Press button longer than (in 0.1s)
--> Scenario memory
(for call up and storage) 0 ... 50